ARTHA INTILESTARI

PT. Artha Intilestari

Head Office:
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.

Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089

Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309

Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753

021 5631149-50
021 56975420

089654260311

021 5631151

cs@arthainti.com

Product

16:26 Monday, 18 March 2013PLS6.150D

The PLS6.150D is a free-standing platform with a materials processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³) that supports dual lasers. As a dual laser platform, the PLS6.150 can support up to two 10.6µm CO2 lasers with a power range of 10 watts to 150 watts. Additionally, it can support a single 9.3µm CO2 of 30, 50 or 75 watts. (if a 9.3µm CO2 laser is installed, only one 10.6µm CO2 of up to 75 watts may be installed at the same time.)

10:58 Tuesday, 23 June 2020Laser Cut

10:38 Tuesday, 16 June 2020ILS9.150D

The ILS9.150D is a free-standing platform with a materials processing envelope of 36” x 24” x 12” or 10,368 in³ (914 x 610 x 305 mm or 169,901 cm³). The dual laser platform supports a power range of 10 to 150 watts (up to 75 watts with one 10.6µm CO2 laser; up to 150 watts with a second 10.6µm CO2 laser).

The ILS9.150D also supports a single 9.3µm laser at 30, 50 or 75 watts (If a 9.3µm CO2 laser is installed, the maximum 10.6µm laser is 75 watts).

16:33 Wednesday, 28 February 2018Kisun KDC 24R2T

Two separate coating paths allow operators to use not only both for UV coater with different glossy and matte finishes or optional texture rollers, but lower roller for primer or water-based liquid coater with IR heater and upper roller for UV coater.
Warm-up, preparation, finish section, coating and cleaning are fully automated and controlled through the user-friendly touch screen.