PT. Artha Intilestari
Head Office:
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.
Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089
Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309
Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753
Jl. Prof, Dr. Latumenten no. 10. Jakarta Barat DKI Jakarta 11460. Indonesia.
Branch Offices:
Bandung
Jl. PHH Mustofa No. 35. Gedung Dapensos Lt. 4, Bandung 40124. Indonesia
Phone: 0812 24448089
Surabaya
Jl. Dukuh Kupang Timur X / 69C, Surabaya 60225, Indonesia
Phone: (031) 5681309
Yogyakarta
Ruko Bayeman Permai A-15, Jl. Wates Km 3.5, Yogyakarta 556182, Indonesia
Phone: (0274) 560753
021 5631149-50
021 56975420
021 56975420
089654260311
021 5631151
CNC & Laser Solution
VLS3.60DTThe VLS3.60DT is a compact and economical entry level platform that offers a material processing envelope of 24" x 12" x 4" or 1,152 in³ (610 x 305 x 102 mm or 18,878 cm³). The VLS3.60DT can be equipped with one of five 10.6µm CO2 laser sources ranging in power from 10 to 60 watts or one 9.3µm CO2 30 watt or 50 watt laser source.
VR48 CNC Router/ EngraverThe VR48 CNC Router/ Engraver is the best heavy-duty 4x8 CNC router that can produce accurate, repeatable, cost-effective work in considerably less time than it takes to do the same work by hand. Featuring our state-of-the-art Vision Series 5 Controller with V-Touch Pendant and our graphically advanced Vision software, this machine is perfect for a wide variety of applications including milling, drilling, contouring, and routing.
PLS6.150DThe PLS6.150D is a free-standing platform with a materials processing envelope of 32" x 18" x 9" or 5,184 in³ (813 x 457 x 229 mm or 84,950 cm³) that supports dual lasers. As a dual laser platform, the PLS6.150 can support up to two 10.6µm CO2 lasers with a power range of 10 watts to 150 watts. Additionally, it can support a single 9.3µm CO2 of 30, 50 or 75 watts. (if a 9.3µm CO2 laser is installed, only one 10.6µm CO2 of up to 75 watts may be installed at the same time.)
iMarc-IT EngraverThe iMARC-IT Engraver is an all-in-one metal engraving machine that requires no software, or computer to run. Just a quick one time holder set-up and virtually anyone can use the iMARC-IT with no training. Designed as a plug and engrave diamond drag (scratch engraving) system, you won't have to learn all the details of running an engraving machine to create quality engraved products or items. The iMARC-IT Engraver comes ready to go with 7 engraving fonts and a wide selection of clipart for immediate engraving satisfaction!